

DESCRIPTION
The control valves are the ideal choice when it is necessary to regulate or monitor flow rate and direction. Specifically designed for use in a wide range of measurement, mixing, weighing, and filling systems applications, they are the perfect solution for precise flow or pressure control
CPM-2 Valve
Designed to maintain a constant pressure at the valve inlet or outlet through shutters of different sizes and with varying Kv values, the valve responds to any changes in product pressure by adjusting its position while maintaining a constant air pressure. They are often used upstream of filling and bottling machines.
Unique RV-P
Unique RV-P is a sanitary electro-pneumatic control valve designed for applications requiring precise control of pressure, flow rate, temperature, tank level, and more. It is remotely controlled via an electrical signal and compressed air. The IP converter, which is an integral part of the actuator, converts the electrical signal into a pneumatic signal. Thanks to the highly accurate and reproducible contactless AMR sensor it is based on, this signal conversion is completely insensitive to vibrations and pressure fluctuations.
The pneumatic signal is transmitted to the integrated positioner, which operates based on the principle of force balance, ensuring that the actuator piston position is directly proportional to the input signal. The signal range and zero point can be individually adjusted. The actuator can also be used for split-range operation by using a different measuring spring.
The valve is integrated into the Unique SSV platform and consists of a valve body, shutter, lip seal, cover, and external actuator. The actuator, along with the cover, is attached to the valve body using a clamp. The Kv value is flexible, as the lower sealing element can be replaced
Unique RV-ST Control Valve
A push-and-play control valve with an integrated IP converter on the Unique SSV platform. It features shutter designs with different Kv values, allowing for varying capacities. This enables effective product flow control by balancing pressure drops and stroke lengths. It is widely used as a control valve in measurement, mixing, weighing, and filling applications.


